|
|
| |
|
|
|
|
ClorMatic
Electrolytic Sanitizer
Following these
handy tips will help you get the most out of your ClorMatic
unit.
DO List
- Increase Chlorine Production before
party time and return to normal afterwards.
- Increase Chlorine Production when
temperature goes up.
- Increase Chlorine Production when
number of guests goes up.
- Use Stabilizer (Cyanuric Acid) to
Stabilize Chlorine in Pool.
- Mount Power Supply in shade or out of
the direct sunlight whenever possible.
- Decrease when temperature goes down.
Fall/winter etc.
- Take Pool water sample to Pool
Professional once per month.
DON’T List
- Do not get fertilizer in your pool.
Fertilizers contain nitrates which cause a high chlorine
demand on pool water.
- Never use dry
acid to adjust pH in arid geographic areas with excessive
evaporation and minimal dilution of pool water with fresh
water. A build up of by products can damage the
electrolytic cell.
- Do not add any pool water balancing
chemicals unless the Chlorinator is turned off.
- Do not let Chlorine Stabilizer drop
below 50 PPM
|
| |
|
|
|
|
|
|
Mark Laviola |
|
1620 Comstock
Drive / Maryville, Tennessee 37803 |
|
Phone
865-983-7101 or 865-719-4311 |
|
